For Sale  2 trawl Winches,1 Gantry,2set of trawl (nets) doors,1 set of Spectra bridles,1 almost new bottom net,2 used bottom nets,mud gear cokkies,1 cod end and 1 Nordic Longline hauler.Please contact 253 310 2820

This is a running take out with 3600+ hours on it. I repowered with a smaller lighter motor more appropriate for my boat. It is a typical Bristol Bay motor with some rust on the aft part. Make me an offer, I’d like to get it out of the way.

Call 907-252-5752

 

I am a licensed captain with my own crew looking for a tender job for the 2012 herring/salmon season,  I do have a resume give me a call (907) 575-8904 or (907) 351-3081.

F/V Viking 1
Bristol Bay Driftnet Deckboss & Deckhand Wanted
I am looking for a deck boss with 5+ years experience in Bristol Bay salmon driftnet fishing. Must know how to prepare, mend and strip gill nets. Good overall knowledge of hydraulics, taking salmon off nets and running a crew.  Also it’s extremely helpful if you have experience with diesel engines and jet propulsion systems.  
 
I am also looking for a deck hand with experience in Bristol Bay salmon driftnet fishing.
 
Please respond to my email with your name, #, resume and references if interested.
vikingwildfish_seafood@yahoo.com

SS Propeller 58 x 35 Four Blade RH 4"
Great Shape, ready to go, can be pitched up, no dings, chips or bends  
$6000 OBO  206-718-9917.  photo, photo.

 

RSW 15Ton System
New rebuilt compressor 1 1/2 yr old, condensor, receiver, 10 hp elec 
Motor, direct drive coupler, Motor starter, Control Panel  206-718-9917

photo, photo, photo, photo, photo, photo.

Kolstrand AW1N deck winch, tall aluminum housing.  This one is a self-pursing winch with line sheaves and idlers on both sides.  Winch was rebuilt with a new shaft and bearings last year.  Also has a 12 inch riser block underneath it.  $9900 OBO. 

Kolstrand SW1N deck winch.  Steel housing, does not have sheaves.  Removed from previous seiner a few years ago.  Was in working condition when I removed it and has only been in storage since.  $1500

Marco 26B power block with welded aluminum cleats.  No leaks.  $6000

Gearamatic boom winch.  Model 4.  $500

15 mesh chaffing strip, older orange nylon.  Excellent condition with only 2 seasons of use on it.  Enough for PWS seine.  Has a "ribline" sewn into it the entire length.  $500

I have other stuff taking up locker space too, but offhand don't remember what, so if you're looking for something in particular, feel free to ask as I might have it, or know someone who does.

907-253-3364
 

Brass round hatch and rim. Rim 23" OD, 18" clear opening. Elliot foundary brass flush deck hatch. $100. fvjuliakae@hotmail.com 206-909-0341. Seattle.  photo, photo
 

Kolstrand longline side roller, 24" roller with 9" horns, like new, used one seasone of open access.  The price is $2,000.00 Please contact me at warrentug@yahoo.com or call warren at 541.550.0184   Located in Bend, or.

fresh rebuilt 4-71 short port high block GMC less than 100 hours very nice engine $6,500 Butch 707-834-1531
 

Patent pursers for sale built to purse menhaden used 1 season complete units capable of pursing a millon menhaden in one set simple design work great steal @ $1000 each also have purse weight wench used to drop 1000lb lead weight in purse net for more info and pics  bubbagump43@ymail.com

Power roller wanted. Bristol Bay style. 36 to 42 inch.
Please call Scott at 907-738-7766
Jsseaton907@gmail.com

 

Paul Martin Articulating Gillnet Reel with 4 Gang Hyd Valve, like new condition.  Two SE gillnets, nets are in poor condition but the lead line and cork line are good.  Everything is loaded in a 92 Ford F150 4X4 pickup.  $7500.00 OBO.  Located in Petersburg, Alaska.   Pictures available.  seafoodfas@yahoo.com. 541-223-4387

 

Wanted:  Hydraulic Power pack in good shape...no junk,  Honda engine only.  most are made by LFS in Bellingham,  call  Harry 425-220-3988
 

2012 tender job wanted. I have 30yrs fishing and 7yrs. of that tendering,bristol bay,s.e. alaska,and puget sound. I'm a good engineer,cook,work the deck,run the boat. I'm 49 and live in the seattle area. I can be ready in a 24hr. notice. Please call 253-653-8604.

used crabpots for sale: still on the boat. take your pick @$30 each . located @ fishermens terminal --seattle. aprox. size 40" x 50 lbs. ---about 30 left. call (360)293-8666 or cell #(360)708-2030. leave your phone #. thanks.

twin disk 506 marine gear 2.5 to 1 caterpiller model. needs rebuild $1000 , small rsw system $1000  call 778 836 2990.    gear photo, gear photo, rsw photo, rsw photo.                          
 

For Sale: SSB radios with tuners, have three SEA and one ICOM, all are programmable.  Call Chris, 250-949-1891

salmon seine 220 fathems long 575 meshes deep  $2900     call   778 836 2990  photo
 

Powered by 1693 cat 535hp , air controls  twin dic torq. Line pull 100,000 , 1450 ft 1/14 line cap. $35,000 . Dave 250-743-1169 - domack@shaw.ca

 

Gearmatic Model 5 hydraulic winch. Clean running unit , came off crabbing boat,  $500
brendadonn@shaw.ca
 

Excellent shape with large drum , rated line pull is 44,000 pounds SLP.  $7,500.  Dave at 250-743-1164 or domack@shaw.ca

Looking for Gillnet(s)
I am located in Ketchikan, Alaska. I am looking for 200 fathom salmon gill nets.
Any Chum/Pink/Coho nets would be great, thanks!
email: nick.martin09@gmail.com
phone: 907-821-8278  or   907-247-6998

Aluminum net reel $750.00.  glpscoop69@hotmail.com  photo, photo, photo.

70 used 8’ cone pots for sale. Dorians 300-400 lbs. Rigged for tanner and king. Decent shape and fished recently. Located in Petersburg. $300 each OBO. e-mail me at lindell586@gmail.com

70- 8’ Dorian Cone Pots. Recently Used And Rigged For Tanner And King. 300-400 Lbs. $350 each OBO. Contact lindell586@gmail.com

east hope drum drives and drum reels for sale ,some in parts some complete,rollers too.$100 –$1200 .also halibut drum w/ spooler ,crab traps ,and boat parts like brass port holes ,etc. – email – stansteer@msn.com

2 aluminum picking booms for sale. Winch and pulley pads on both. 3" tube and strongbacked on all sides. One is 20' and the other is 24' long.
1200$ each. call 360-220-5968

4 sale, 20 - 8 foot diameter by 34 inch tall cone pots for tanner fishing located in Kodiak. 400 lbs have a side door for unloading in rough weather and a pucker string bottom also. Good condition. 450.00 each.
 
Bill Connor 360-951-9213 or 907-772-3737

Fiberglass gillnet reel with 300 fathom Alaskan sockeye net.  Net is in fairly good shape, but needs some work.   $1000.00  glpscoop69@hotmail.com

Hydraulic valves and hoses for sale mass hoses and Commercial shearing valves  4 manifold valves with total 14 circuits.  asking  $3,500.00 email sardinea@comcast.net

 

Wanted:  V-653 Detroit, Joe 253-732-6532

To all CAPTAINS out there:

You need a deck hand Im your man,

I have opilio, salmon, halibut, cod, experience  in alaska... I have done some deep water dragging also in the south pacific, for many other species.

I am a hard worker with good references.  I Do what im told and I know what to do on deck.  please contact me,  I can leave at a moments notice. 

Thanks,
Matt

please email me,

stinson108.3@gmail.com

 

Wanted:  342 Caterpillar, Joe 253-732-6532

4 soft mount engine mounting blocks for sale. located in Seattle. $100 for the set. fvjuliakae@hotmail.com 206-909-0341
 

For sale PWS sewn on seine 3 1/4 strips, 12-14 lb lead line, solid corks sistered on for a gripper. Comes with enough web to deepen to 5 3/4 strips. Whole net hardly ever used lead brand new last year. Great net needs some web replaced to smaller mesh size for the sound but over all its just to big for my boat. asking 20,000    call 907-752-3693

Looking for Hydraulic Anchor Winch for 50foot/30 ton work-boat. 22''X22'' Drum, give or take. Aluminum or Galv, in good condition. Please email if you have or know of one!
Paul: coastimaging@gmail.com

 

1101 Comnav autopilot in excellent condition 40 amp. control unit, including magnetic compass and one station Jog steer.  The jog lever stopped working before I took it out, most likely a relay.  $1000.00  glpscoop69@hotmail.com

52" diameter drum rebuilt in 2011. Rebuilt kinematics twister drive, new hydraulic motors for drum and level wind, new hydraulic valves for drum and level wind, new hydraulic hoses with quick connects, new bearing. Easily fits 300 fathoms, ready to fish. Located in Sitka. contact Stephen 907-738-7569 deep_pow@hotmail.com  photo, photo, photo

Thompson Anchor Winch. Galvanized 12" drum - 20" high and 24" wide. Complete and in good shape. Right size for 40-50 footer. $2,200 Will deliver for shipment in Seattle area. Call Tom 206-498-2828
 

Hydraulic valves and hoses for sale:  3/4 to 1 1/4 hoses and 4 valve banks  1   One-bank  2 Two bank   1  Three-bank  and 1 Seven bank.    I Believe they are  commercial shearing valves. located in Seattle still on boat and in working order.  make offer:  email:  sardinea@comcast.net

Marco 28" Power Block, $13000
Swivel and Standard Power Roller Tire, Some Xtra Cleats;  budsmail@comcast.net
  or 206-718-9917

 

Gillnets and supplies tons of nets . Was told this is 20 or 30 thousand $ worth of nets Columbia river nets .all in expensive net bags .3000$ in storage owed and there yours.503-739-3684
 

rebuilt 40in pilkinton self purseing winch [ 40in wide  x 28in aprox] , 52in self purseing winch [52 in wide x 30 in aprox ] both winches are ready  for shipping   call    778 836 2990  photo

Looking for 15 to 17 inch crab pot hauler. Call 907-454-2556.

 

long line gear -20 coils of 3/8' med. lay nylon (new) with fixed swivels @42" @$20. each.  bronze level-wind + sprocket & bearings @ $1500.  s.s. snaps @.60 each. call (360)293-8666 or cell # (360) 708-2030 or e-mail me @   lynnedan98221@yahoo.com

The sonar is still installed and can be viewed working. sales brochure can be found at www.wesmar.com/pdf/Sonar/ss395_web.pdf  $4500 or best offer. contact at bruce_sam@q.com or call 360-301-1099
 

21 Years Experience
Dungeness Crab, Tuna, Bottom Fishing, Pelagic
Seafood Sales and Processing Experience
100 Ton Masters License
Drug and Smoke Free
Very Clean
Responsible
Good Production Record


Call Anytime: 541-601-3184
 

6-110 150 KW Three phase with panel genset, skid mounted radiator cooled. Fresh rebuild, military takeout. 2000.00  Mike 425-238 3313 Port Angeles

 

3-71N power unit skid mounted,radiator cooled. Good runner 1500.
Mike 425-238-3313 Port Angeles
 

I would like to purchase a dampner plate and a salt water pump that runs of a gear. Call Garys Seafood at 443-521-1002 when available. 

3 v12-149 GM diesels all running takeouts  Call 1 (250) 949-1891

Dungy pots wanted, new or used, 60-100#

I am looking for 100 commercial grade pots in new or good used condition. I can pick up in WA, OR or CA. I can be reached @ (303)709-1785 or marshallmcclung59@gmail.com.

New cummins marine diesel   "K"  model   ,kt 1150 m,Kta 1150 m and Kt 19 m , kta 19 m, 2new pistons  cummins #3007750 ,New turbo elbo cummins #3019974 usa  , New marine exhaust manifold cummins #3019579 usa, rebuilt 32 volt starter , call 778 836 2990  photo

For sale: Yaquina Block : PB-2, s/s sheaves 24", Hydrostar KYB 95. Contact email:  ithplanet@gmail.com

 

Dungeness CRAB POTS WANTED:  I need 100  TWO TUNNEL COASTAL  Dungeness CRAB POTS, 36-40 INCH 70-100 LBS. A.S.A.P. CALL JACK 360-581-6074 BAY POTS ARE GREAT TOO!
 

Pilkington Trawl Winches.  Best suited for 550 h.p. or less.    Can carry 500 fath. of 5/8" wire.  Direct drive Staffa motors.  One spare motor included.  $6,000. as is where is.  contact  tomevich@comcast.net

totally rebuilt double pump hyd drive with pumps. photo, photo.
two deck winches email for prices. photo, photo.
newmandon55@gmail.com

set of kolstrand troll gurdies with motors for $1200.00
Huff loneline hauler 19in.   Price: $2000.00 firm.  photo
907-738-2636       shamrock19669@yahoo.com



 

2 STRIP SEINE      150 fm. Single- pin seine w/rib line (both sides),5# lead line,good shape
$ 15000.  Call EJ 907-253-7105(cell) or 907-424-7106
 

1-yaqnina capston like new 5,000
3-sodium wide lights 1,000
 

(707)-954-5977

Looking to buy used troll gear for southeast fishing.  Just starting out, have almost nothing.  Need to get snaps, flashers, spoons, etc.  Looking to buy out troller cleaning out the gear locker/closet.  call 907 518 4158.  I'm in southeast alaska, but will be in california and the northwest this winter.

343 Cat and Twin Disc 514 Gear 4.5:1 For Sale

8000 hrs on last rebuild runs fine, good shape, available Jan. 2012
budsmail@comcast.net or message at 206-718-9917
 

5 new nets, 2 lightly used nets, 10 very lightly used line sets. Package deal for $10k. All in Bellingham. Please call 360-927-8373.

we looking for ADAPTER plate N03 - from Cummins 6BT  5.9 L  to Hurt ZF or Velvet Drive transmission. Material and price ??
Thank you Vic.
H21SROUB@seznam
or
H-21.V.SROUB@shaw.ca

 

WANTED: DUNGY GEAR FOR THE COAST. NO JUNK. PLEASE CALL JOHN @ 360-395-8273.

new pink shrimp trawl net, 46' foot rope, cod end, extra floats $7500.00 glpscoop69@hotmail.com
 

11.5" diameter
only used 2 seasons
New dump bucket
Impeller just re-done
Complete spare bearing with bearing housing
Intake grate
S.S.  Hydraulic Dump bucket Ram
Aluminum transom mounting plate, ready to weld into boat
Located in Homer, Alaska
Asking $15,000


Jamie 907-299-2081
shadowfax@alaska.net

CUMMINS PARTS.  6BTA,  RAW WATER PUMP,  GEAR OIL COOLER,  HEAT EXCHANGER.  $1,500. for all or individually??.

contact Mike @ 907 441-4286
 

WANTED: TWISTER GILLNET REEL DRIVE : KINEMATICS HAVE$$  OR WHOLE REEL AND LEVEL WIND with Twister drive on it! Call Jack 360-581-6074  NO JUNK PLEASE.
 

50 Amp McCarron Constavolt 32v  $1,000

32v to 24v Converter (20amp)      $50

Leece Neville 32v - 60amp dual pulley alternator          $50

Rule 32v pumps (unused) 2000gph & 3700gph         $25 each

Gruuolfos pump (unused) Model MQ3-35C, 31psi, 13gpm - SS & fiber, 115v          $100

Hydraulic bait chopper, 12-18 gpm                 $100

Jabsco 115v, 3.6amp vane puppy               $100

jbodding@comcast.net  or  360-941-0297

For Sale: 2 Westec 10X20 Herring Pumps. Ph 253-370-1718

 

I am looking for a longline reel levelwind with a 2" shaft . the longline reel is 48" wide so if anybody has anything close to that size please call or email me.
Cell # (907)232-0541
email: davidp@mtaonline.net
 

to all crabbers:  hard core solid man that you can count on good for upcoming dunggiess season: block or box man able to bow/obey for crew togetherness/unity
                           mark  ruffner  206-412-2558  how about it...
                                    markworks1@hotmail.com          
 

FOR SALE: Dickinson Atlantic Stove less than 10 hours use came off a yacht small piece of mortar in burner pot broken during shipping, easily fixed. $1,500.00 plus shipping or best offer.
Contact:  Richard at jeanor2001@yahoo.com or call 907-738-9391. photo, photo.

For Sale Tuna Puller with valve and motor and heavy stainless mounting bracket.  $600.00 plus shipping.  Please contact Richard at jeanor2001@yahoo.com  or call 907-738-9390, photo
 

FOR SALE:  Dinglebar Hauler with adjustable clutch valve and motor. Spool holds 350FA of 560 force wire.  Can also be used as a line capstan.  $600.00 plus shipping. Please email: Richard at  jeanor2001@yahoo.com or call 907-738-9391 for further questions.  photo
 

FOR SALE:
Two slightly used DNG computerized jigging reels for sale, manual included $2,500. Please contact Richard at 907-738-9391 or 907-738-9390 with further questions. Email: jeanor2001@yahoo.com for more pictures.   photo, photo

26" Kinematics powerblock with aluminum sheeves, good motor and 20 ft of 1 inch hydro hose.  Located in Homer.  $6,000 Mike 907-299-4069

Wanted:  Isuzu 6bd1 engine and mitsubishi 6d14 or 6d17 engines also Lister diesel engines, running or not   Harry  425-220-3988 Bayview Wa.

Seines and gillnets hung to your specifications or ours. We can pick- up most anywhere in the Puget Sound area. Access to all new gear and Jovanovich water color gillnet web.30 + years fishing and hanging gear. Space available for fall. References available. American made Diamond seine web available.    Tim Jovanovich    206-463-2156  or cell 206 707-5254  e-mail crisjov@hotmail.com or islandnets@gmail.com
 

Used duoprop props, size A4.
Refurbished at sitka prop shop,
not used since then.  Aluminum.
Front & rear prop, 3 blade and a 4 blade
counter rotating.  I have 2 sets.
I switched to A3's.  Can Email pics.

$350 per set , offer
rmrnow@yahoo.com

red lead paint for wood boats ,wood and steel ,old school primer needs lots of sterin,contact stansteer@msn.com

hello my names Jeremy in trying to line some work up for the fall and winter, or anytime. im 26yrs old a hard worker with good references. i just got home from sandpoint alaska were we just finished up are salmon season  there. im ready to work anytime.

*cod 2 seasons

*salmon 1 season seining

*crab 1 season dungies

*charter 3 seasons

*tuna 1 season.

 you can call me anytime (541)570-2313 or email fishon6685@hotmail.com 
 

For Sale Articulating Reel with a New Kinematic Levelwind. Worked perfectly this season. Removing for Modifications... Make Offer the levelwind cost $3000 Brand new.
 
907-250-6430
 

Wanted   experienced cod captain with references and  proven production for 58' steel boat  in WG.  Please reply to codcaptain@gmail.com 

I am an American running a couple of businesses here in Mozambique.  I have available a fishing license good for 1500 tons of tuna, 900 tons of pelagic and 48 tons of prawns per year. No limits on which kind of tuna you catch.  Must be by longline with ship size of 90' to 150' with 600hp to 1500hp. There is an upfront charge of $15,000 and a 70/30 split on the catch with 70% going to the foreign operator and 30% to the local license holder. We can provide full assistance in offloading the catch in Mozambique port(reg requirement) and shipping the catch out in reefers to boats' buyers.

Contact - Al Wojewnik @ al@giwax.com

 

Just finished my fourth consecutive year fishing salmon in Alaska.  In my fishing experience I have fished Bristol Bay, Gill netted, and Seined in Prince William Sound, and also have Gill netted in Cook Inlet...  I'm a U.S Navy Veteran, and know the ethics of hard work!  I am open, and wanting to try a new fishery through the fall and winter such as Cod, Halibut, King Crab, California Squid, or California, Oregon, and Washington Dungies!  Im am versatile, but most of all I love to commercial fish!  Please call Brandon Abbott @ 541 521 3848